Matrix DWS 710 Betriebsanleitung Seite 19

d) Use the cable solely for its intended
purpose. Do not use the cable to carry or
hang up the power tool or to pull out the
plug from the socket. Keep the cable away
from heat, oil, sharp edges or moving machine
parts. Damaged or twisted cables increase the
risk of electric shock.
e) When working outdoors with power tools,
only use extension cords which are suited for
outdoor areas. Using extension cords suited for
outdoor applications reduces the risk of electric
shock.
f) If the operation of power tools in a humid
environment cannot be avoided, you must
use a residual current circuit breaker. The use
of a residual current circuit breaker will reduce
the risk of electric shock.
4.3 Personal safety
a) Pay attention to what you are doing
and use power tools sensibly. Do not use
power tools when you are tired or under the
influence of drugs, alcohol or medication.
A single moment of inattention while using
power tools may cause severe injury.
b) Wear personal protective equipment and
safety goggles. Wearing personal protective
equipment such as a dust mask, non-skid safety
boots, a protective helmet or hearing protection
according to the type and application of the
power tool reduces the risk of injury.
c) Avoid starting the power tool
unintentionally. Make sure that the power
tool is switched off before you connect it to
the mains and/or insert a battery, pick it up
or carry it.
If you have your finger on the switch when
you carry the power tool, or if the machine is
switched on when you connect it to the mains,
this may result in accidents.
d) Remove adjustment tools or wrenches
before switching on the power tool. Tools or
wrenches in rotating machine parts may cause
injury.
e) Avoid abnormal body positions. Stand
securely and keep your balance at all times. By
doing so, you can control the power tool more
easily in unexpected situations.
f) Wear suitable clothing. Do not wear loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts. Loose
clothing, jewellery or long hair may be trapped
in moving parts.
g) If dust extraction tools or collection bins
can optionally be attached, you must make
sure that they are connected and correctly
used. Using dust extraction tools may reduce
risks caused by dust.
4.4 Use and treatment of the power tool
a) Do not overload the tool. Use the
appropriate power tool for your type of
work. With appropriate power tools, you can
work better and more safely within the given
power range.
b) Do not use power tools with defective
switches. Power tools which cannot be
switched on or off are dangerous and must be
repaired.
c) Pull out the plug from the socket and/or
remove the battery before you make settings
to the tool, replace accessory parts or put
aside the power tool. These precautionary
measures will prevent the power tool from
starting unintentionally.
d) Keep power tools which are not in use
away from children. Only persons who are
familiar with the power tool and who have
read the operating instructions may use the
power tool. Power tools are dangerous if used
by inexperienced persons.
19