Matrix DWS 710 Betriebsanleitung Seite 18

Wear goggles!
Wear safety gloves!
Wear protective clothing!
Do not dispose of this power tool in
your household waste. Observe the
disposal instructions provided in this
instruction manual.
This is a protection class II power tool.
This means that the power tool is
equipped with a reinforced or double
insulation between mains supply
circuit and output voltage or metal
housing.
CE stands for "Conformité
Européenne" which means
"Compliance with EU directives". With
the CE marking, the manufacturer
confirms that this power tool
complies with the applied European
directives.
18
4. General safety notes for power tools
Warning!
Read all safety notes and
instructions! Non-compliance with
safety notes and instructions may result in
electric shock, fire and/or severe injury!
Store all safety notes and instructions for the
future.
The term "power tool" used in the safety notes
refers to power tools connected to the mains
(with a power cable) or operated with a battery
(without a power cable).
4.1 Workplace safety
a) Keep your workplace clean and well-
illuminated. Disorderliness and poorly-
illuminated workplaces may lead to accidents.
b) Do not operate the power tool in explosive
atmospheres with inflammable liquids, gases
or dust. Power tools generate sparks which may
ignite dust or vapours.
c) Keep children and other persons away
from the power tool during operation. You
may lose control of the tool if you are distracted.
4.2 Electric safety
a) The plug of the power tool must fit into the
socket. Do not modify the plug in any way. Do
not use adapter plugs together with grounded
power tools. Unmodified plugs and matching
sockets reduce the risk of electric shock.
b) Avoid body contact with grounded
surfaces such as pipes, radiators, ovens and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
c) Keep power tools away from rain or
humidity. Water permeation into the power
tool will increase the risk of electric shock.