Installation And Connections - Pioneer XPRS-Serie Bedienungsanleitung

Installation and Connections

How to Install
The playback sound of the speaker is subtly influenced by the conditions of the
listening room. Carefully consider the installation location before installing
the speaker so that it can be used in the best conditions. Pioneer DJ will not
be liable for any damages arising from the use of the speaker (including but
not limited to loss of business opportunities), regardless of the installation
method.
Use the handles shown on the right when moving and installing the speaker.
CAUTION
! When standing or laying the XPRS215S, take care that the casters do not
slip and cause an injury.
! To promote proper cooling, please assure that sufficient space is
preserved between the speakers and nearby walls or other components
(minimum 30 cm or more above, behind, and to right and left sides of
each speaker). Leaving insufficient space between the speaker and walls
or other components may lead to rising interior temperatures, leading to
malfunction or damage.
! For natural stereo effect, the right and left speakers should be installed in
symmetrical and equidistant positions from the listening position.
Installation Using a Speaker Pole
XPRS12/XPRS15
There is a 35-mm-diameter multi-angle pole socket on the bottom surface
and can be installed downward at an angle of 0° or 7° to the floor surface.
To use a speaker pole, check the following and perform the installation
safely.
! At least two persons should together lift the speaker to install.
! Cables should be taped or tied together with cable ties so as to avoid
the danger of tripping on the cables and toppling the speaker.
! Ensure that there is no danger of toppling.
XPRS215S
There is an M20 screw-in pole socket on the top surface and the pole can
be secured firmly.
To use the speaker together with the XPRS12 or XPRS15, use a
35-mm-diameter, one-side M20 screw-in speaker pole.
! Use a commercially available speaker pole with an outer diameter of 35
mm or less and a length of 900 mm or less. We shall not be liable for
any damage (including loss of business opportunities) arising from the
use of a speaker pole other than specified.
! Install the speaker in a stable location and secure the speaker pole
firmly.
Front
7° 0°
35-mm-diameter
pole socket
M20 screw-in
pole socket
XPRS12
Installation example using a speaker pole
Front
7°
Handle
XPRS15 XPRS215S
XPRS12 or XPRS15
XPRS215S
0°
5
En