Cloud Storage For Snapshots; Saving And Loading Different Configurations; Tips - Monacor AXR-series Bedienungsanleitung

2) To set the recording times, keep the left mouse button
pressed and move the mouse pointer over the time range
desired. Individual half-hour blocks can be selected by a
simple click.
3) Proceed in the same way to delete recording times.
4) To automatically save recordings when a motion is detected
and/or an alarm is triggered, first click the yellow ellipse
"Motion" or the red ellipse "Alarm". Then keep the left
mouse button pressed and move the mouse pointer over
the time range desired.
5) To use the setting for other camera channels as well, make
the appropriate selection in the line "Copy CH ... To All"
at the bottom of the menu and then click "Copy".
6) To save the setting, click "Save"; to delete all times, click
"Default"; to exit the menu, click "Cancel".

6.13.1 Cloud storage for snapshots

When a recorder is stolen or damaged, all recordings will be
lost. However, it is possible to automatically save snapshots to
a cloud (storage space on an external server) provided that the
recorder is connected to the Internet. The images can then be
called up via a protected access to the cloud:
1) Sign up to the "Dropbox" website:
https://www.dropbox.com
2) Call up the menu "Device" and then click the submenu
"Cloud".
Parameter Record Search
HDD
Cloud Storage Disable
PTZ
Cloud Type DROPBOX
Cloud
Channel
Analog Channels
IP Channels
Time trigger 1 Min
Motion Detection Disable
Driver Name Device
Activate Cloud
Upgrade Cloud Storage
Fig. 6-29 Menu to save images to a cloud
3) In the submenu "Cloud", make the settings required.
Menu item Function
Cloud Storage To enable /disable the cloud function
Currently, it is only possible to save to "Drop-
Cloud Type
box"
To select the channels whose images are to be
Channel
saved to the cloud
Time intervals between recordings in normal
Time Trigger
mode
Motion To save (additional) recordings when a motion
Detection
is detected
To define the name under which the images are
Driver Name
to be saved to the cloud
Activate Cloud To activate the cloud function, click here
If you want to receive an e-mail when images
Advanced are saved to the cloud, click this button and
E-mail Setup then, in the window that will appear, enter the
required information.
Default Reset to factory settings
Save To save the setting
Cancel To exit the menu
i
Device System Advanced
1 2 3 4
1 2 3 4 5 6
Advanced E-mail Setup
Default Save
6.14 Saving and loading
different configurations
It is possible to save different recorder configurations for dif-
ferent users or fields of applications (e. g. to a USB flash drive)
and to retrieve them when required.
1) Connect an external storage device (flash drive/hard disk)
to one of the two USB ports of the recorder.
2) Configure the recorder as desired.
3) Call up the menu "Advanced"; the submenu "Maintain"
will appear:
Parameter
Maintain
Events
Fig. 6-30 Menu "Advanced", submenu "Maintain"
4) Click "Save Settings". The window "Save Settings" will
appear. Make the settings for saving and click "OK". The
name "DEVICE_Settings" will be assigned to the config-
uration file.
5) If you have more than one configuration, save the config-
urations to different folders to make sure that a recorder
Shutdown
configuration already saved will not be overwritten.
6) To load a configuration, click "Load Settings".
Cancel

6.15 Tips

Tip
To automatically set the recorder
for daylight saving time
To automatically set the time via
the network
To restrict motion detection
To automatically send an e-mail in
case of an alarm
To switch off channels where no
camera is connected
For each switched-off channel of
an analog camera, an additional
IP camera can be used
When no recorder is connected to
a network, to disable the network
menus in order to obtain a sim-
pler user interface
i
Record Search Device System
Default User admin
Auto Reboot Enable
Reboot Every Week Sun.
Update Load Default
Load Settings Save Settings
IPC Load Default Reboot IPC
Menu path
System  General  DST
System  General  NTP
Parameter  Alarm  Motion
Parameter  Network  Email
Parameter  Display  Analog
Channels
System  General  General:
Mode = DVR
Advanced Shutdown
00:00
IPC Upgrade
Default Save Cancel
47