Honeywell 3000 MkII-Series Technisches Handbuch Seite 23

SERIES 3000 MKII TECHNICAL MANUAL S3KMKIIMAN_MAN0878_Issue 8_08/2015
Inhibit icon ( )
The inhibit icon displayed when in the configure inhibit, bump test and force current menu modes.
Warning / Fault icon ( )
The warning / fault icon is displayed if a warning or fault is detected and if a zero or span calibration fails.
Test Pass icon ( )
The test pass icon is displayed after a successful zero / span calibration. In monitoring mode it flashes
every second indicating that no warnings / faults are detected and that the unit is functioning properly.
Diagram 12: Gas Type and Formula displays
23