Honeywell 3000 MkII-Series Technisches Handbuch Seite 14

SERIES 3000 MKII TECHNICAL MANUAL
When all electrical connections have been made, refit the display module and cover using the
procedure below:
1. Ensure that none of the wires in the terminal area may cause an obstruction.
2. Align the display module plug with the socket on the terminal module.
3. Push the display module firmly, without twisting, until fully home.
4. Refit the cover by screwing clockwise until tight.
S3KMKIIMAN_MAN0878_Issue 8_08/2015
14