Safety Instructions - iTD uni-cart Gebrauchsanweisung

1.3

Safety instructions

Please observe the following instructions
•
General
Only those mobile equipment carriers may be operated whose main voltage equipment has
•
been tested and approved!
•
Personnel working directly or indirectly with a mobile equipment carrier must be instructed!
•
Setting adjustments may only be carried out by qualified personnel
Repairs and maintenance work may only be carried out by ITD GmbH
•
Operation
With every change of location it must be ensured that no one is injured or objects damaged!
•
Connections
Only equipment satisfying the requirements of EN 60601-1 may be connected to the sockets /
•
connecting cables!
Additional medical equipment with connecting bolts for equipotential bonding are to be con-
nected with the green-yellow cable to the optional equipotential bonding connecting bolts!
•
Load capacity
The total weight of the equipment and the accessories on the mobile equipment carrier may
•
not exceed the permitted payload weight. (See load capacity sticker on the base frame)
•
The surface load imprinted on the system components may not be exceeded!
The load shown on the fittings (e.g. infusion stand, articulated arms) may not be exceeded!
•
Infection protection
•
Hygiene regulations are to be observed when cleaning!
Give only cleaned and disinfected equipment and fittings to a service technician for
maintenance and repair work!
•
Environmental protection
Dispose of all cleaning and disinfection agent residue in a manner not harmful to the
environment!
Operating manual uni-c rt, pro-c rt, duo-c rt, comp ct-c rt, cl ssic-c rt and endo-c rt 03-2007
Important information
23