Set Alarm - Silvercrest SKR 800 C3 Bedienungsanleitung

♦ Press the
on the display
♦ Turn the −TIMER+ dial
♦ Press the
flashes in the display
♦ Turn the −TIMER+ dial
(Off). When the RDS function is turned on the signal is strong enough,
the time and date is corrected automatically if necessary.
♦ Press the
the display
♦ Turn the −TIMER+ dial
or
is deactivated between 23:00 and 05:00. This switch-off time is pro-
grammed permanently and cannot be changed.
♦ Press the
DT and
the year on the display
after around 5 seconds.

Set alarm

Requirement: The device is in clock/standby mode.
The device has two alarm functions. For both functions, you can programme an
alarm sound
at a certain time. The alarm time and alarm type are shown below left on the
4
display
♦ Press the
2 seconds. The hour flashes on the display
♦ Turn the −TIMER+ dial
♦ Press the
setting. The minutes flash on the display
♦ Turn the −TIMER+ dial
♦ Press the
setting.
♦ Turn the −TIMER+ dial
or alarm
♦ Turn the −TIMER+ dial
♦ Press the
selected alarm type.
■ 40 │ GB │ IE
0
button to accept the setting. The day date display flashes
4
.
8
0
button to accept the setting.
4 .
8
button to accept the setting. DT (Display Dimmer) flashes on
0
4
.
8
(On). When the display dimmer is turned on, the display illumination
0
button to accept the setting. The time, date and, if applicable,
appear on the display
4
or playback of the last selected radio station
.
| MEM button
8
| MEM button
8
| MEM button
(Off) flashes on the display
8
.
8
or radio .
| MEM button
left or right to set the day.
(RDS - radio data system)
left or right to turn the RDS function
left or right to turn the display dimmer
4
. Push the −TIMER+ dial
. The display will automatically jump back to time
z | AMS button
or the
4
.
left or right to set the hours.
z | AMS button
or the
4
.
left or right to set the minutes.
| AMS button
z
or the
4
.
to the right to set the alarm type to alarm
to the right again to set the alarm type to radio
z | AMS button
or the
(On) or
(Off)
8
to show
or
e
for about
e
to save the
e
to save the
e
to accept the
SKR 800 C3