Electrolux ERN29801 Benutzerinformation Seite 32

32 electrolux
Ha
Hc
9. Install the part Ha on the inner side of the
kitchen furniture.
ca. 50 mm
ca. 50 mm
10. Push the part Hc on the part Ha.
Hc
11. Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Hb
Hd
90°
21 mm
90°
21 mm
Ha
Put together the appliance door and the
furniture door and mark the holes.
8 mm
Hb
12. Remove the brackets and mark a dis-
tance of 8 mm from the outer edge of the
door where the nail must be fitted (K).
8 mm
13. Place the small square on the guide
again and fix it with the screws supplied.
Align the kitchen furniture door and the
appliance door by adjusting the part Hb.
Ha
K
Ha