Ayce ALM 36-1 Li Übersetzung Der Originalbetriebsanleitung Seite 96

.
Do not clean the lawn mower with running water, particularly with high-pressure
water.
.
At the end of the season, perform a general inspection of the lawn mower and
remove any grass and dirt which may have accumulated. At the start of
each season, ensure that you check the condition of the blade. If repairs are
necessary, please contact our customer service center. Use only genuine spare
parts.
Servicing
.
Ensure that all mounting components (i.e. screws, bolts, nuts etc.) are always
tightened so that the equipment can be safely operated at all times.
.
Frequently check the grass catch assembly for signs of wear.
.
Replace excessively worn or damaged parts immediately.
.
In order to ensure that you enjoy your equipment for many years to come, all
screwed parts, as well as the wheels and axles, should be cleaned and
lubricated.
.
There are no parts inside the equipment which require additional maintenance.
Replacing the blade
The cutting components - i.e. the knife cage and lower knife blade - are subjected
to more wear and tear than any other component of the unit.
Therefore, routinely check the condition of the blade and make sure that it is
tightly fastened.
If the blade is completely worn out, it must be immediately replaced or ground
sharp again. An excessively vibrating mower means that the blade is not properly
balanced or has become deformed from striking an object. In this case, the blade
must be repaired or replaced.
For safety reasons, we recommend having the blade replaced by an authorized
professional.
Important. Wear work gloves! Only replace the blade with a genuine replacement
blade, as this will ensure top performance and safety under all conditions.