Cleaning
Top Plate and Control Panel
Metal Frame
(KY-B627GF & KY-B617AF only)
Troubleshooting
During the warranty period, any repairs may only be performed by service
■
technicians authorised by the appliance manufacturer.
Unauthorised repairs may cause electric shock and short circuit; do not attempt
■
this yourself. Consult an authorised service technician.
In case of minor faults or problems with the appliance operation, check the
■
following instructions to see whether the causes can be eliminated.
34
EN
Caution
■ Before cleaning, turn off the main power switch. Allow to cool
before cleaning the top plate.
■ Do not use a steam cleaner. Water may get into the electrical
components and cause damage.
Always keep the appliance in a clean condition.
Spilled food or oil scorched on the appliance may
become difficult to clean.
Light stains
■ Wipe off with a damp cloth.
Oil stains
■ Wipe off with a cloth dampened in mild detergent.
■ Do not use strong acidic or alkaline detergents, such
Heavy stains
■ Apply non-abrasive cream cleaner to the top plate or
Note
Ensure there are no stains on the base of the cookware.
In case of spillage, wipe from the metal frame
immediately. Otherwise the stains will be difficult to
remove.
Note
A visit by a service technician during the warranty period will be
charged if the appliance is not functioning because of improper use.
Store these instructions in a place where they are always readily
accessible; if passing the appliance on to another person, the
instructions should also be included.
as bleach or synthetic detergents. They may cause
discolouration.
control panel and wipe with a cloth.