Autoboil Mode - Panasonic KY-B627GB Bedienungs- Und Installationsanleitung

IH Cooking

Autoboil Mode

Note
Note
■
■
20
EN
Available on the cooking zone with
1. Touch and hold the main power key to turn on
the power.
2. Select the cooking zone with
large cookware, the whole flex cooking zone can
also be selected by touching either front or rear
cooking zone selector twice.
3. Touch Autoboil key. The appliance beeps 5 times
when the water reaches boiling point and maintains
a rolling boil. After beeping add ingredients and
adjust the temperature with the slider as required.
Temperature '100' will flash in the display until the boiling
temperature is reached. After the water is boiled, the
appliance automatically defaults the temperature to '95'.
Increase or decrease the temperature between '65-100' as
required in 5 °C steps.
4. Touch and hold the key of the cooking zone or
set the temperature to "OFF" to turn off.
The cookware size and material (e.g. non-stick coating) and the
volume of water may affect the sensor detection. If the water has
not boiled after beeping or it has boiled but the appliance does not
beep, select a temperature as required.
Cooking Timer can be used with Autoboil Mode. (See page 27)
.
. For