Before Starting The Equipment - Ayce RMB46 SHW BS500E 2.6 PS Original Bedienungsanleitung

5. BEFORE STARTING THE EQUIPMENT

5.1 Assembling the components
Some parts of the equipment come disassembled. For quick and easy assembly,
read and follow the instructions below.
Note! You will need the following additional tools (not supplied) for assembly, and
also for maintenance work:
•
One flat oil drip tray (for changing the oil)
•
One 1 liter measuring jug (oil/petrol resistant)
•
One petrol can
•
One funnel (suitable for the tank's petrol filler neck)
•
Household wipes (to wipe up oil/petrol residue; dispose of these at a filling
station)
•
One petrol suction pump (plastic, available from DIY stores)
•
One oil can with hand pump (available from DIY stores)
•
Engine oil
Assembly
1. Fit the lower and upper push bar (Item. 3) as shown in Fig. 3a-3b. For fastening
choose one of the holes to suit the required height of the push bar.
Important! The identical height must be set on both sides.
3a
2. Insert the grip of the starter cable (Item 9a) into the hook provided for that pur-
pose as shown in Fig. 3c.
3. Fasten the actuator cables to the push bar with the supplied cable clips (Item
10) as shown in Fig. 3d.
Anl_RMB_46_2_S_HW.indd 91 Anl_RMB_46_2_S_HW.indd 91
11 3
12a
3b
11 9b
12b 12b
GB
90 I 91
11
24.11.15 13:40 24.11.15 13:40