ABICUT 155
12 Disposal
12.1 Materials
When disposing of the system, local regulations, laws, provisions, standards
and guidelines must be observed. Observe the regulations on the disposal of
electronic scrap and dispose of it at your local waste disposal site (e.g.
recycling centre).
To correctly dispose of the product, it must first be disassembled. Please take
note of the following information:
11 Disassembly on page EN-18
This product is mainly made of metallic materials, which can be melted in steel
and iron works and are thus almost infinitely recyclable. The plastic materials
used are labelled in preparation for their sorting and separation for later
recycling.
12 Disposal
EN - 19