Abicor Binzel ABICUT 155 Betriebsanleitung Seite 22

EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment
(PPE)
2.4 Classification of the warnings
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional description
6 Putting into operation
6.1 Setting up the torch body
6.1.1 Accessories
6.2 Connecting the plasma
cutting torch
EN - 2
EN-3 6.2.1 Compressed air for plasma
EN-3
6.2.2 Filtered compressed air free
EN-3
EN-3 6.2.3 Plasma cutting torch with
EN-4
7
EN-4
EN-4 7.1
EN-5 7.2
EN-5 7.3
EN-5
EN-7 7.4
EN-8 7.5
EN-8
8
EN-8
9
EN-9
EN-9
10
EN-9
11
EN-10
EN-11 12
EN-11 12.1
12.2
EN-13 12.3
and cooling gas
of oil and water
a central connector
Operation
Before switching on
Trigger guard (for manual
torches only)
Trigger with dual-cycle function
(for manual torches only)
Safety device
Igniting the torch
Putting out of operation
Maintenance and cleaning EN-16
Troubleshooting
Disassembly
Disposal
Materials
Consumables
Packaging
ABICUT 155
EN-13
EN-13
EN-14
EN-14
EN-14
EN-14
EN-14
EN-15
EN-15
EN-16
EN-17
EN-18
EN-19
EN-19
EN-20
EN-20