Abicor Binzel ABICUT 155 Betriebsanleitung Seite 32

6 Putting into operation
Torch carriage
Spacer
Mount for the machine cutting torch
EN - 12
• Without circular guide
• Distance spring
• Bevel nozzle
• Hole piercing cap
• The ABICUT 155 MT machine cutting torch is attached to the machine by
a mount.
• The machine cutting torch is clamped to the clamping area marked as SB1
using a clamping sleeve. In the absence of a clamping sleeve, it can be
clamped to SB2.
Fig. 4 Overview of the clamping area
Fig. 5 Mount for the machine cutting torch
ABICUT 155