Abicor Binzel ABICUT 155 Betriebsanleitung Seite 26

3 Product description
Application process
Type of use
Pilot current
Rated current and corresponding duty cycle
Type of gas
Gas flow rate
Operating pressure
Operating pressure min./max.
Air flow rate measured with nozzle bore
Plasma air
Soft start
Gas post flow delay
Type of voltage
Protection type of the machine-side
connections
Type of ignition
Compressed air as plasma and cooling gas
Arc ignition and rated voltage
Voltage rating
Type of cooling
Control device rating
Tab. 3 General torch data (EN 60 974-7)
ABICUT 155
Nozzle
Tab. 4 Selection of plasma nozzle
EN - 6
42 VAC/0.1 – 1 A
1.2 mm
1.5 mm
1.6 mm
1.8 mm
1.2 mm long
3.0 mm
ABICUT 155
Plasma cutting, plasma gouging
Manual
15 – 27 A (max. 29 A)
150 A/60%, 120 A/100%
Compressed air
Approx. 235 l/min
5 – 5.5 bar
4.8 / 7.0 bar
1.8 mm
Approx. 39 l/min
≥15 l/min
≥ 60 sec.
DC direct voltage
IP3X (EN 60 529) IP2X (EN 60 529)
HF
Yes
7 kV
Peak value of 500 V
Air
Up to 70 A
Up to 70 – 90 A
Up to 90 – 120 A
Up to 120 – 150 A
Max. 50 A
For gouging
ABICUT 155
ABICUT 155 MT
Automatic
-