Abicor Binzel ABICUT 155 Betriebsanleitung Seite 31

ABICUT 155
6.1 Setting up the torch body
1
11
10
1 Distance spring
2 Spatter protector
3 Cap body
4 Nozzle
Fig. 2 Setting up the torch body
6.1.1 Accessories
Torch carriage set
2 3 4
5 Swirl ring
6 Electrode
7 Cooling tube
8 Insulator
• The torch carriage makes it possible to cut circular parts in the diameter
range of approx. 100 to 1000 mm with the ABICUT 155 manual torch.
• The torch carriage is clamped to the protection cap.
NOTICE
• When tightening the set screw on the clamp, ensure that the protection
cap is not subject to excessive pressure, damaging the female thread.
Fig. 3 ABIPLAS
5 6 7 8
9
10 Hole piercing cap
11 Bevel nozzle
®
torch carriage
CUT 155
6 Putting into operation
9
Torch body
EN - 11