Werbung
Verfügbare Sprachen
Verfügbare Sprachen
English
Steam Station
Sensity Non Stop
Dear customer,
Many thanks for choosing to purchase a TAURUS brand product.
Thanks to its technology, design and operation and the fact that it exceeds the
strictest quality standards, a fully satisfactory use and long product life can be
assured.
Description
A
Tank filler opening
B
Iron ready indicator
C
Steam Button
D
Tank release button
E
Temperature and steam control
F
Stand
G
Handle
H
Power cable
I
Handle housing
J
Water tank
K
Anti-limescale filter
Read these instructions carefully before switching on the appliance and keep
them for future reference. Failure to follow and observe these instructions may
result in an accident. Failure to follow and observe these instructions may
result in an accident.
Safety advice and warnings
- The appliance should be used and
kept over a flat and stable surface.
- When the appliance is placed on its
support, make sure that the surface on
which it is placed is stable.
- This appliance may be used by
people unused to this type of product,
disabled people or children aged from
8 years and above if they have been
given supervision or instruction concer-
ning use of the appliance in a safe way
and understand the hazards involved.
- Keep the appliance and its cable out
of reach of children under the age of
eight.
- Do not use the appliance if it has fallen
on the floor, if there are visible signs of
damage or if it has a leak.
- The water fill-up opening must not be
left open while the iron is being used.
- The temperature of the accessi-
ble surfaces may be high when the
appliance is in use.
- If the mains connection is damaged, it
Manual Sensity NS.indb 6
must be replaced. Take the appliance
to an authorised Technical Assistance
Service. In order to prevent any danger,
do not attempt to dismantle or repair it
yourself.
- Ensure that the voltage indicated on the nameplate matches the mains
voltage before plugging in the appliance.
- Connect the appliance to a base with an earth socket withstanding a minimum
of 16 amperes.
- Do not use or store the appliance outdoors.
- Do not force the electrical wire. Never use the electric wire to lift up, carry or
unplug the appliance.
- Check the state of the power cord. Damaged or tangled cables increase the
risk of electric shock.
- Do not touch the plug with wet hands.
- If any of the appliance casings breaks, immediately disconnect the appliance
from the mains to prevent the possibility of an electric shock.
Do not touch metal parts or the body when it is operating, as it may cause
serious burns.
Use and care:
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if the accessories or parts are not fastened together
properly.
- Use the appliance handle/s, to catch it or move it.
- Respect the MAX level (Fig. 2)
- Disconnect the appliance from the mains when not in use and before under-
taking any cleaning task.
- This appliance is for household use only, not professional or industrial use.
This appliance should be stored out of reach of children and/or those with redu-
ced physical, sensorial or mental abilities or who are unfamiliar with its use.
- Do not store or transport the appliance if it is still hot.
- To ensure that the iron functions correctly, keep the iron face smooth and
do not hit it against metallic objects (for example, the ironing board, buttons,
zips...)
- IMPORTANT: Replace the ANTISCALE filter after every 30 tank fills approxi-
mately or use demineralised water when the filter is spent.
- The use of demineralised water is recommended, especially if the water in
your area contains any type of grit or is "hard" (contains calcium or magne-
sium).
N.B.: It is normal to hear a pumping sound as the water is pumped into the
steam generator.
- Never leave the appliance connected and unattended if is not in use. This
saves energy and prolongs the life of the appliance.
- Do not use the appliance on any part of the body of a person or animal.
- Do not use the appliance with pets or animals.
- Turn the thermostat control to the minimum (MIN) setting. This does not mean
that the iron is switched off permanently.
Service:
- Make sure that the appliance is serviced only by specialist personnel, and
that only original spare parts or accessories are used to replace existing parts/
accessories.
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Prepare the appliance according to the function you wish to use.
Filling with water:
- It is essential to have filled the deposit with water to be able to work with
steam.
- Remove the tank from the appliance.
- Fill the deposit taking care to observe the MAX level (Fig. 2).
- Replace the tank in its housing, ensuring that it is well fitted.
Use:
- Uncoil the cable completely and lift the handle before plugging it in.
- IMPORTANT: Check that the water tank is coupled correctly to the anti-scale
filter on the inside before switching on the appliance (Fig. 1)
- Fill the deposit taking care to observe the MAX level (Fig. 2)
- Connect the appliance to the mains. (Fig. 3)
- Switch the appliance on, setting the temperature and steam control (E) to the
position that corresponds to the desired temperature (Fig. 4)
- The pilot light (B) comes on (Fig. 3)
- Do not use temperatures higher than those indicated on the garments to be
treated.
● Temperature for synthetic fibres (Polyester, Nylon...).
21/07/15 15:58
Werbung
