Optional Equipment; Disposal; Ec Declaration Of Conformity; Electromagnetic Compatibility (Emc) - RIDGID RE 60 Bedienungsanleitung

RE 6/RE 60/RE 600 Electrical Tools

Optional Equipment

WARNING
To reduce the risk of serious injury, only use equip-
ment specifically designed and recommended for
use with the RIDGID Electrical Tools, such as listed
below.
RE 6/RE 60/RE 600 Series
Catalog
No. Description
44693 18V 2.0Ah Battery (North & Latin America, Australia)
44698 18V 4.0Ah Battery (North & Latin America, Australia)
43458 120V Advanced Lithium Battery Charger
43333 230V Advanced Lithium Battery Charger
43323 18V 2.0Ah Battery (Europe & China)
43328 18V 4.0Ah Battery (Europe & China)
RE 6/RE 60 Series
Catalog
No. Description
52283 4P-6 4PIN™ Dieless Crimp Head
52078 Swiv-L-Punch Knockout Punch Head
47918 SC-60C Cutter Head for Copper/Aluminum Wire
49408 SC-60C Cutter Head for ACSR
52083 RE 6 Carrying Case (Plastic)
47773 RE 60 Carrying Case (Plastic)
47753 LR-60B Latching Round Head
For a complete listing of RIDGID equipment available
for these tools, see the Ridge Tool Catalog online at
RIDGID.com or see Contact Information.

Disposal

Parts of the Electrical Tool contain valuable materials
and can be recycled. There are companies that specialize
in recycling that may be found locally. Dispose of the
com ponents in compliance with all applicable regula-
tions. Contact your local waste management authority
for more information.
For EC Countries: Do not dispose of elec-
trical equipment with household waste!
According to the European Guideline 2012/ -
19/ EU for Waste Electrical and Electronic
Equipment and its implemen tation into nation-
al legislation, electrical equipment that is no
longer usable must be collected separately and disposed
of in an environmentally correct manner.
10

EC Declaration of Conformity

The EC Declaration of Conformity (890-011-320.10) will
accompany this manual as a separate booklet when
required.
Electromagnetic Compatibility
(EMC)
The term electromagnetic compatibility is taken to mean
the capability of the product to function smoothly in an
environment where electromagnetic radiation and elec-
trostatic discharges are present and without causing
electromagnet interference to other equipment.
The RIDGID RE 6/RE 60/RE 600 Family of Electrical
Tools conform to IEC61000-6-5 (Ed. 1.0) Electromagnetic
Compatibility (EMC) Part 6-5: Generic Standards – Im -
munity for Equipment Used in Power Station and Sub -
station Environment.
These tools conform to all applicable EMC
NOTI E
standards. However, the possibility of them causing inter-
ference in other devices cannot be precluded. All EMC
related standards that have been tested are called out in
the tool's technical document.
999-999-463.08_REV. G