Blackmagic Design Blackmagic Pocket Cinema Camera 4K Installations- Und Bedienungsanleitung Seite 77

Use the touch keyboard to enter lens data if it is not provided automatically
‚ Iris
Shows the iris aperture setting at the start of your clip. This information can be
displayed in f- or T-stops depending on the lens used, if supplied automatically. Tap this
setting to enter data manually.
‚ Focal length
Shows the focal length setting of the lens at the start of the recorded clip. When
automatically supplied, this is shown in millimeters. Tap this setting to enter the focal
length manually.
‚ Distance
Shows the focus distance settings of the lens for the recorded clip. Some lenses can
provide this data automatically and it will be provided in millimeters. You can also enter
this data manually.
‚ Filter
Shows the current lens filters used. Tap this setting to enter data manually. You can
make multiple entries separated by commas.
Filter information needs to be entered manually
NOTE You can clear lens data at any time by tapping the 'reset lens data' icon in the
'lens data' menu. You will be prompted to confirm your choice. If you confirm, all lens
data will be cleared and repopulated with any lens data automatically provided by the
currently fitted lens. If you have manually entered any information into these fields, you
will need to reset the lens data the next time you mount a lens, otherwise the manually
entered value will remain.
Entering Metadata 77