Blackmagic Design Blackmagic Pocket Cinema Camera 4K Installations- Und Bedienungsanleitung Seite 65

To set these buttons, select a function button and then the behavior, settings and
parameters you want for that function.
1
3
4
1 Button 2 Behavior
Function 1/2/3 Behaves as
Once you have selected the function button you want to map, you can select a behaviour.
The available options are:
‚ Preset
When set to this behavior, pressing a function button recalls a combination of a setting
and a parameter.
To set a preset, select the setting you want to use from the 'setting' menu, and adjust
that setting by tapping the arrow icons on either side of the 'parameter' menu.
For example, to set the F1 button to recall a preset aperture of f8, select the 'preset'
behavior, tap the 'iris' setting, and tap the arrows on either side of the 'parameter' menu
until you get to f8.' Tapping the preset again returns your camera to the
previous setting.
‚ Toggle On/Off
When set to this behavior, pressing a function button toggles a particular setting on or
off. The 'setting' menu is greyed out in this mode. Instead, tap the left or right arrows in
the parameter menu to scroll through the available options. These are 'off speed
recording', 'ois', 'clean feed', 'display LUT', 'frame guides', 'focus assist', 'false color',
'zebra', 'grid' and 'safe area guide'.
Use the 'Toggle On/Off' behaviour to select the output this setting applies to. Tap any
combination of 'LCD' and 'HDMI' to select. If the output for an option cannot be
selected, such as 'color bars' which always applies to all outputs, the separate
'LCD' and 'HDMI' settings are disabled.
Setup Settings Page 3
The third page of your Blackmagic Pocket Cinema Camera 4K's 'setup' tab contains the
following settings.
2
3 Setting 4 Parameter
Settings 65