Cognex In-Sight 7000 Gen2 Serie Handbuch Seite 18

7905 Vision System Specifications
Specifications
Power Consumption
Power Output
1
Case Temperature
Storage Temperature
Humidity
Protection
Shock (Shipping and Storage)
Vibration (Shipping and Storage)
1
Case temperature can be verified using the EV GetSystemConfig("Internal.Temperature") Extended Native Mode
command. When issued, it returns the vision system's internal temperature in degrees Celsius, which will be about
3 to 5 degrees above the vision system case temperature. For more information, refer to the In-Sight
file. A thermal scanner can also be used to determine the vision system case temperature. Additional cooling
measures are required if the case temperature cannot be kept below 50°C. Examples of such measures include:
extra heat sinking and/or air movement.
2
Lenses weighing more than 150 grams should be removed during shipment of this product or any machinery into
which it is built.
24VDC ±10%, 1.5A maximum
24VDC @ 750mA maximum to external light.
0°C to 50°C (32°F to 122°F).
-20°C to 80°C (-4°F to 176°F)
< 80% non-condensing
IP67 with all cables properly attached (or the provided connector
plug installed), the IP67-rated cover properly installed and the
Micro SD card cover fastened in place.
IEC 60068-2-27: 18 shocks (3 shocks in each polarity in each (X,
Y, Z) axis) 80 Gs (800m/s
cable plugs and a 150 gram or lighter lens attached.
2
IEC 60068-2-6: vibration test in each of the three main axis for 2
hours @ 10 Gs (10 to 500 Hz at 100m/s
cable plugs and a 150 gram or lighter lens attached.
17
7905
2
at 11ms, half-sinusoidal) with cables or
7905C
2
/ 15mm) with cables or
®
Explorer Help