INVENTOR MGHP-12 Benutzer's Betriebshandbuch Seite 6

Function buttons (continued)
SET TEMPERATURE( F)
AUTO FAN
HIGH
COOL
DRY MED
HEAT LOW
TEMP
ON/OFF
MODE
FAN SPEED
SWING ECONOMY TIMER ON
TIMER OFF
RESET LOCK
FOLLOW
LED
ME DISPLAY
Model: RG51B1/(C)EU,
RG51B/(C)EU,
RG51B26/(C)EU,
RG51B30/(C)EU,
RG51B31/(C)EU.
NOTE:
RG51B/(C)EU models
have no SWING and FOLLOW ME
buttons ;RG51B1/(C)EU models
have no FOLLOW ME button;
RG51B30/(C)EU models have no
SWING ,FOLLOW ME buttons and
MED FAN feature,and SLEEP button
instead of ECONOMY button;
RG51B31/(C)EU models have on
FOLLOW ME button.
SET TEMPERATURE( F)
FAN
AUTO
COOL HIGH
DRY MED
HEAT LOW
TEMP
ON/OFF
MODE
FAN SPEED
SWING TIMER ON
SLEEP
TIMER OFF
ION RESET LOCK
TEMP
LED
SENSING
DISPLAY
Model: RG51B17/(C)EU
NOTE: While the unit is running under SLEEP mode,
it would be cancelled if ON/OFF, FAN SPEED, SLEEP
or MODE button is pressed.
10
TIMER OFF Button
Press this button to activate the Auto-off time
setting. Each press will increase the time setting
in 30 minutes increments, up to 10 hours, then at
1 hour increments up to 24 hours. To cancel the
Auto-off time setting, just press the button until
the time setting is 0.0.
11 LOCK Button
Press this recessed button to lock all current
settings, and the remote controller will not accept
any operation except that of the LOCK. Use the
LOCK mode when you want to prevent settings
from being changed accidentally. Press the LOCK
button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display
when the lock function is activated.
LED Display Button
12
Press this button to clear the display on the
indoor unit, press it again to light the display .
NOTE:
RG51B20/(C)E models have no this feature.
13
FOLLOW ME/TEMP SENSING Button
Press this button to initiate FOLLOW ME function.
When the Follow Me function is activated, the
remote display is actual temperature at its location.
The remote control will send this signal to the air
conditioner every 3 minutes interval until press
the Follow Me button again.
The Follow Me function is not available under
DRY and FAN mode.
Switch the operation mode or turn off the unit will
cancel the follow me function automatically.
14 ION Button
When push this button, the ion generator is
energized and will help to remove pollen and
impurities from the air.
9
13
14
RG51B18/(C)E ,RG51B19/(C)E-M,
5