Grundig MC 8840 Handbuch Seite 25

OPERATION_______________________________
Hair_trimming
Make sure that the hair is clean and
completely dry.
Place a towel around the neck and
shoulders of the person whose hair
you are trimming. Make sure that
the person is seated so that their
head is roughly at your eye level.
Before trimming, comb the hair so
that it falls naturally and you can
see the direction in which it grows.
1_
Adjust the trimming length by refer-
ring to the "Preparation" section.
2_
Press the On/Off switch
switch on the appliance.
3_
Place the cutting head
person's hair.
4_
Move the cutting head
the direction of hair growth. Apply
only a slight pressure when cutting
with slow, gentle movements.
5_
After use, switch off the appliance
with the On/Off switch
Useful_tips
Always cut against the natural
7
direction of the hair.
As you cut, take a break at regu-
7
lar intervals. You can always
make a correction, but not once
the hair has been cut.
Only cut a small amount the first
7
time you use it. This is the only
way to get used to the variable
positions.
Keep combing the hair. Only
7
look for hair which is too long
and comb out clippings.
Beard_trimming_
1_
Adjust the trimming length by refer-
ring to the "Preparation" section.
2_
Press the On/Off switch
switch on the appliance.
to
E 3_ Place the cutting head
beard.
on the
B
4_ Move the cutting head
the direction of hair growth. Apply
only a slight pressure when cutting
against
B
with slow, gentle movements.
5_
After use, switch off the appliance
with the On/Off switch
Notes
.
E
If the appliance is blocked by
7
thick hair while you are using
it, switch it off. If running it from
the mains, unplug the socket.
Remove the adjustable comb
and clean the cutting head
with the brush
the appliance as described in the
"Cleaning and Care" section.
E
on the
B
against
B
.
E
J
supplied. Clean
ENGLISH 25
to
A
B