Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product Description
1. LCD display
2. Menu
3. Enter
4. Up
5. Down
6. Signal indicator
7. Microphone
8. Power input connector
9. Fuse 1.5A 250V
10. Power output connector
11. 3-pin DMX input
12. 5-pin DMX input
13. Ground terminal
14. Ethernet port IN/OUT for RJ45 cable
15. 3-pin DMX output
16. 5-pin DMX output
17. Safety ring
Electrical Installation
Important: The lectrical installation should be carried out by qualified personal only, according to the
regulations for electrical and mechanical safety in your country.
STAND-ALONE INSTALLATION WITH BUILT-IN CHASES
Use this function if you want an instant show on only 1 projector.
Connect the projector to the mains. Select one of the following modes in the setup menu:
• Auto Mode: select this mode to control the show of the white led's.
• Sound mode: select this mode to run the selected shows to the rhythm of the music.
STAND-ALONE MASTER/SLAVE OPERATION WITH BUILT-IN CHASES
Use this function when you want an instant show on 2 or more projectors.
By linking the units in master/slave connection, the first unit will control the other units to show a
synchronized automatic or sound activated light show.
Connect the projectors as shown in the drawing below.
• The first projector will start running its selected show.
• The connected projector(s) will be set automatically as SLAVE.
©Copyright LOTRONIC 2018
PIXCOLOR
Page 4
Werbung
