Most Used Parameter List - Safeline SL6+ Installationsanleitung

Most used parameter list

- for full list see installation manual
CONFIGURATION DATA
Enter configuration mode
Enter password
Exit configuration mode
ALARM CODES
P100 ID code
CPC ID code
Q23 ID code
TELEPHONE NUMBERS
1st Phone number
2nd Phone number
3rd Phone number
4th Phone number
CALL TYPE
Call type 1st number
Call type 2nd number
Call type 3rd number
Call type 4th number
Call type LMS number
TEST ALARM &
BATTERY ALARM
LMS phone number
Test alarm
Call back test alarm
Days between tests
Test alarm protocol
[DOCSxxxx] SL6 Quick guide 201811.indd 31
CODE DATA COMMENTS
00
* - - - - # Default = 0000
*00*#
CODE DATA COMMENTS
*01* - - - - - - - - # P100 is always 8 digits
*02* - - - - - - # CPC 6-8 digits
*03* - - - - - - - - - -
Q23 is always 12 digits
- - #
CODE DATA COMMENTS
*11* - - - - - - - - - # Phone number to alarm receiver: 1-20 digits.
Each asterisk (*) is equal to one second
*12* - - - - - - - - - #
delay.
*13* - - - - - - - - - #
*14* - - - - - - - - - #
CODE DATA COMMENTS
*21* - # 0 = P100
1 = VOICE (default)
*22* - #
2 = Q23
*23* - #
3 = CPC
*24* - #
*30* - # 0 = P100
3 = CPC (Only battery alarm)
5 = SMS
CODE DATA COMMENTS
*16* - - - - - - - - - # LMS (Lift Monitoring System) phone number.
*17* - - - - - - - - - # Phone number to send test alarm.
*19* - - - - - - - - - # Triggers a test alarm event to a user selected
phone number.
*27* - - # Number of days between test alarms, 00-99
days. Always two digits.
*31* - # 0 = P100
3 = CPC
4 = Caller ID
31
p. 26
English
2019-02-21 15:10