Herunterladen Inhalt Inhalt Diese Seite drucken

Petsafe Pawz Away Gebrauchsanweisung Seite 9

Mini haustier barriere
Vorschau ausblenden Andere Handbücher für Pawz Away:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 88
Proper fit of the Receiver Collar is important. A Receiver Collar worn
for too long or made too tight on the pet's neck may cause skin damage. Ranging
from redness to pressure ulcers; this condition is commonly known as bed sores.
• Avoid leaving the Receiver Collar on the pet for more than 12 hours per day.
• When possible reposition the Receiver Collar on the pet's neck every
1 to 2 hours.
• Check the fit to prevent excessive pressure; follow the instructions in this manual.
• Never connect a lead to the Receiver Collar; it will cause excessive pressure on
the Contact Points.
• When using a separate collar for a lead, don't put pressure on the
Receiver Collar.
• Wash the pet's neck area and the Contact Points of the Receiver Collar weekly
with a damp cloth.
• Examine the contact area daily for signs of a rash or a sore.
• If a rash or sore is found, discontinue use of the Receiver Collar until the skin
has healed.
• If the condition persists beyond 48 hours, see your veterinarian.
• For additional information on bed sores and pressure necrosis, please visit
our website.
These steps will help keep your pet secure and comfortable. Millions of pets are
comfortable while they wear stainless steel contact points. Some pets are sensitive
to contact pressure. You may find after some time that your pet is very tolerant of the
Receiver Collar. If so, you may relax some of these precautions. It is important to
continue daily checks of the contact area. If redness or sores are found, discontinue
use until the skin has fully healed.
You may need to trim the hair in the area of the Contact Points. Never shave the dog's
neck; this may lead to a rash or infection.
To assure a proper fit, please follow these steps:
1. Using the edge of the Test Light Tool, turn the battery door
to the OFF (O) position.
2. Start with your pet standing comfortably (4A).
3. Place the Receiver collar on your pet so that the PetSafe
logo is facing your pet's chin. Centre the Contact Points
underneath your pet's neck, touching the skin. If your pet
has a long or thick coat then it may be necessary to trim
the hair around the Contact Points to make sure that contact is consistent.
Note: The Receiver Collar comes with Short Contact Points. Long Contact Points are
available and can be purchased through the Customer Care Centre.
www.petsafe.net
4A
®
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pwf17-15853Pwf19-15854

Inhaltsverzeichnis