KLEIBER KPE 660/5 Betriebsanleitung Seite 40

12 Command list
s1/s2 Switching temperature switch 1/2
Command value: 4 digit Hex
sn Inquiry serial number
st Inquiry device status
t1/t2 Switching mode switch 1/2
0 = aus
1 = above value at s1/2
2 = below value at s1/2
tw Response delay - serial interface
Command value: 2 digit decimal in bit times
36
Read: xxs1(2)
Response: 4 digit Hex
Write: xxs1(2)0060 (96 °C)
Response: „ok" when accepted, otherwise
„no"
Limits: xxs1(2)?
Response: 4 digit min. 4 digit max., (corre-
sponds to measuring range, de-
pendent of set unit (see fh))
Read: xxsn
Response: 5 digit decimal
Read: xxst
Response: 6 digit Hex (24 bit), MSB first
bit 23: Pilot light present?, yes = 1
bit 22: Device can measure when pilot
is on?, yes = 1
bit 17: = 1, when unit in °F
bit 16: Measured value resolution in
1/10 degree?, yes = 1
bit 11: Ambient temperature compensa-
tion present?, yes = 1
bit 17: Device has alarm (switching)
comparators? yes = 1
bit 14: Device has a keyboard and dis-
play for parameter setting?, yes
= 1
all other bits are always 0
Read: xxt1(2)
Response: 4 digit Hex
Write: xxt1(2)2 (below set value at s1)
Response: „ok" when accepted, otherwise
„no"
Limits: xxt1(2)?
Response: 1 digit min. 1 digit max. („02")
Read: xxtw
Response: 2 digit
Write: xxtw10 (= 1.04 ms at 9.6 kBd)
Response: „ok" when accepted, otherwise
„no"
Limits: xxtw?
Response: 2 digit min. 2 digit max. („0099")
KPE 660/5