Leckey KIT Bedienungsanleitung Seite 17

7.14 Chest Harness
To attach the chest harness to the shoulder
section, first remove the cushion and plastic
cover. Feed the webbing into the holes (A) in
the mouldings and fasten with the nuts and
bolts provided. Attach the top straps to these
buckles. The lower straps attach onto the
buckles on the sacral support. If the standard
sacral support is used, attach the webbing
through the holes (B) at the top of the
moulding and fasten with the nuts and bolts
provided. If the contoured sacral cushion is
used, attach the webbing through the holes
(C) at the bottom of the moulding and fasten
with the nuts and bolts provided.
B
C
A