2
ENGLISH
Enclosure installation RAYSTAT-EX-04 (ambient sensing thermostat)
For optimised temperature control
locate the thermostat:
– as indicated in the system design
documentation
– so that the sensor is exposed to the
coldest conditions
– so that the sensor is not exposed to
direct sunlight where possible
– so that the sensor is exposed to the
strongest wind
DEUTSCH
Gehäusemontage RAYSTAT-EX-04 (Umgebungsthermostat)
Um die Steuergenauigkeit zu erhöhen,
sollten Sie den Thermostaten wie folgt
montieren:
– wie in der Projekt-Auslegung vorge-
geben
– so, daß das Gerät an der kältesten
Stelle der Anlage angebracht ist
– so, daß der Sensor möglichst nicht
direkter Sonneneinstrahlung ausge-
setzt ist
– so, daß der Thermostat an der Stelle
angebracht wird, an der am meisten
Wind herrscht
FRANÇAIS
Montage du boîtier RAYSTAT-EX-04 (thermostat d'ambiance)
Pour un meilleur contrôle de la tempé-
rature ambiante, positionner le ther-
mostat:
– en se référant à la documentation
relative à la conception du système;
– de manière à ce que la sonde soit
exposée aux températures les plus
basses;
– de manière à ce que la sonde ne
soit pas directement exposée au
rayonnement solaire, si possible;
– de manière à ce que la sonde soit
exposée aux vents les plus forts;
– to ensure that no snow can build up
around the sensor
– and to avoid exposure to mechanical
and thermal damage.
WARNING: When working in damp or
wet conditions protect the thermostat
contents from water ingress, by clos-
ing lid when not working on the as-
sembly.
– so, daß der Sensor nicht einge-
schneit wird
– so, daß der Sensor keiner mechani-
schen Beschädigung oder Hitzeein-
wirkung ausgesetzt ist.
WARNUNG: Wenn Sie den Thermo-
staten in feuchter oder nasser Umge-
bung montieren, schützen Sie das
Gehäuse gegen das Eindringen von
Wasser, indem Sie den Deckel schlie-
ßen, wenn nicht daran gearbeitet wird.
– de manière à éviter toute accumula-
tion de neige autour de la sonde;
– et à l'abri de tout dommage mécani-
que ou thermique éventuel.
AVERTISSEMENT:
Lorsque l'on travaille par temps
humide, protéger le thermostat en fer-
mant le couvercle lorsqu'il n'y a pas
d'intervention à y faire.