Lightmaxx VEGA Silent PAR Series Bedienungsanleitung Seite 13

Operating method:
Connect the DMX input of your device to the DMX output of your DMX controller, your DMX soft-
ware or the DMX output of a device in your DMX chain. Always use DMX cables with a 110 ohm re-
sistor in doing so. Direct the device according to your DMX confi guration. The following tables show
the respective DMX modes of the individual devices with the corresponding values and functions.
VEGA Silent PAR I/II Quad/Complete (8 Channel Mode/9 Channel Mode)
Kanal Wert
1 0-255
2 0-255
3
0-255
4
0-255
5 0-255
6 0-255
7
0-255
8 0-255
9 0-255
*
* only with VEGA Silent PAR I / II Complete
Static, Auto or Sound mode:
The device contains automatic programs, which run according to fi xed schemes (Au) or are retrieved
via the built-in microphone to match the music (So). The modes are selected via the menu directly on
the device.
If you connect several devices of the same type via DMX, they can be controlled simultaneously via
the master device. To do this, set the vdesired function on the fi rst device of the chain, the other
devices in the series must now be set as „slave". Now the fi rst device of the chain of all other devices
the function before and all devices run simultaneously.
Funktion
Dimmer
Strobe
Makros
Makros Geschwindigkeit
Red Dimmer
Green Dimmer
Blue Dimmer
White Dimmer
Amber Dimmer