Lightmaxx VEGA Silent PAR Series Bedienungsanleitung Seite 12

Commissioning:
Make sure everything is plugged in before switching on. Only use high-quality, preferably short cables.
Installation:
Be sure to check the device for damage before use. Use original packaging or suitable transport or
storage packaging to protect the product properly against dust or moisture, etc.
The device can be installed for standing or hanging. The attachment is always should be placed on a
solid, approved carrier or a corresponding surface. In order to mount the device, use the opening of
the bracket. Always provide a second, independent fuse of the device, e.g. through a safety.
Working on the equipment (such as assembly) should always take place on a stable platform. Make
sure the area below you is fixed in place.
Please note that it is not possible to use this device with a dimmer!
Warning! (Falling hazard)
It must be ensured that the installation of the device complies with all legal standards
and regulations in the country of use. It must be ensured that the device is always
secured by a second attachment for safety.
NOTICE! (Overheating hazard)
The max. permissible environmental temperature of this device is 40 ° C.
Make sure that the device is always adequately ventilated.
NOTICE! (Use of tripods)
To DMX in and output may under no circumstances be plugged any audio devices
such as amplifiers or mixing consoles!
DMX cables enable trouble-free operation and the highest possible transmission relia-
bility of signal data. Do not use microphone cables.