Audio-video input/output
•
Plug AV cable into the audio and video input jack of the product, in the
main interface.
•
Move to the external input icon, then press the play/pause key to enter
the input mode (press the remote control input key to enter the input
mode).
•
The product shows the images and sounds of the correspomding signal
sources(can be connected to set-top boxes and other equipment).
File Manaqement:
•
Plug in the USB drive or TF card; in the main interface.
•
Move the file management icon.
•
Press the play/pause key to enter the file management interface;the
product will automatically recognize file names in the USB drive or TF
card, and show them in the list form.
•
Press the keys of Previous-song/Next-song to select the file, then press
the play/pause key again to play the selected file.
Settings
•
In the main interface, move to the setting icon and press the play/
pause key to enter the setting page (or press setting key of the remote
control to enter directly into the setting page).
•
Bby using the keys of the up,down, left and right as well as play/pause
key (or
•
confirm key of the remote control)you can modofy settings, the
following settings items can be adjusted:
1.
The system language: There are two languages of chinese and
English, the default one is English.
2. Power volume: Can be adjusted within 0-40, the maximum default
value is 40.
3. Starting the backlight: The time duration for turning off the display
backlight includes, five options for turning off the display backlight:
10 seconds, 30 seconds. 60 seconds, and 90 seconds, the default
time duration for turning off the display backlight is „never".
4. Brightness settings:Can be adiusted within 0-30, the default
maximum brightness is of 30.
5. Background settings: There are 10 background options; you
can choose any one which is your favorite background as the
background of the main interface.
6. Restoring the factory settings: All settings of the product need to be
restored to the factory state.
EN
21