About This Documentation - Lenze E94xMHExxxx series Montageanleitung

1

About this documentation

Identification
Type / product range
9400 Servo Drives
Version
A = 1. (max. 1999 Hz)
B = 2. (from 145 A/75 kW, max. 1999 Hz)
C = 2. (max. 599 Hz)
Version
S = single−axis controller (Single Drive)
M = multi−axis controller (Multi Drive)
P = power supply module
R = regenerative power supply module
Variant
H = HighLine
N = not relevant
P = PLC
Mechanical version
E = Installation
Rated current
e.g. 007 = 7 A, 024 = 23.5 A
Voltage class
2 = 230 V ~ / 300 V =
4 = 400 V ~ / 540 V =
Safety module in MSI
A ... F
Memory module in MMI
22 ... 44
Extension module in MXI2
xx
Extension module in MXI1
xx
In the case of complete devices, the type code can contain a 5−place item of information regarding the configured
installation backplane, whereby this information appears at place 19 after the separator (see places 7 to 14,
power−related accessories). In addition, a 6−place item of information regarding an integrated motor holding brake
control module can be contained (see places 6 to 14, performance−related accessories. "N" means "Not relevant".
With the help of the type code, you can identify supplied products on the basis of the information on the nameplate.
In the product catalogue, you can find the possible configuration in order to order the product.
EDK94MH594 DE/EN/FR/ES/IT 3.0
1 2 3 4
E94 x
(rounded)
(place 7 of the extension modules)
(places 7 and 8 of the extension modules)
(places 7 and 8 of the extension modules)
(places 7 and 8 of the extension modules)
l
About this documentation
5 6 7 8 9 10 11 12
x x E xxx x
13 14 15 16 17 18
x xx xx xx
1
19
−
47