5.4
Mounting the pressure line
A
A. Withdrawal line
B. Euroflex 3
C. Measuring line
D. Condensate trap
If no connection thread is available for the product on the tank, the measuring
line can be connected to the tank by means of the combination fitting "Eurof-
lex 3".
1. Mount the vertical line in the tank in such a way that the lower end of the
vertical line is approximately 20 mm above the lowest point of the tank bot-
tom.
2. Install the measuring line with a steady gradient towards the tank, avoid
bends.
Mounting
B
C
C
F
G
D
E. Unitel
F. Standpipe
G. Spacer
E
D
E
Unitel
EN
15