auna DiscoFever Bedienungsanleitung Seite 29

Problem
No sound - If audio is
going through TV/ home
stereo
No song lyrics appear on
the TV screen
Cannot sing through the
mic
Possible Cause
Source Selection on your
TV/home stereo is not set
properly.
Improper connection to
stereo system or PA.
Video cable is not
connected properly to
the TV.
Source selector on TV
is not set to VIDEO or
A/V IN.
TV does not have video
line input.
A CD+G has been inserted
but the CDG indicator is
not lit.
Improper mic volume
setting.
Mic is off.
Mic is not properly
plugged in.
Solution
Select AV INPUT as the
source for your TV/home
stereo.
Follow directions on
'Audio Connection'
section for connecting to
a home stereo system.
Connect the video cable
to the VIDEO OUT of the
unit and to the TV's Video
In jack.
Use your TV Remote to
select VIDEO or A/V input.
Connect from VIDEO
OUT of the unit to a RF
modulator and then to the
TV cable input.
Check if it is a CD+G or
clean it.
Adjust MIC and MASTER
VOLUME CONTROLS to
appropriate levels.
Turn on mic with the ON/
OFF switch located on the
microphone.
Insert the mic plug fully
into either MIC 1 or MIC 2
JACK of the unit properly.
EN
29