Herunterladen Inhalt Inhalt Diese Seite drucken

Nibe SMS 40 Installateurhandbuch Seite 17

Kommunikationsmodul für nibe f1145; f1155; f1245; f1255; f1345; f370; f470; f750; vvm310; vvm320; vvm500; smo40
Vorschau ausblenden Andere Handbücher für SMS 40:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

hw: nn
?solar
pump: runs/off
BT53: nn
BT54: nn
BT55: nn
?as
status: blocked/off/nn kW
5)
/ nn (number of steps)
time factor: nn
- of which hot water: nn
Command
Parameter
!op
0/1
!tlhw
0/3/6/12
!reg1
-10-+10
!reg2
-10-+10
!reg3
-10-+10
!reg4
-10-+10
!roomt1
5-30
!roomt2
5-30
!roomt3
5-30
!roomt4
5-30
!vac
1/0
!alarm
!vent
0/1/2/3/4
1) Accessories are required
2) Applies to F370 F470 and F750.
3) Applies to F1145/F1155 and F1245/F1255
4) Applies to F1345
5) Applies to VVM310, VVM320 och VM500
6) Applies to F750
7) Applies to SMO40
Example
To check the selected operating mode, the following SMS message is sent: ?status
To activate "Temporary lux, hot water" for 12 hours, the following SMS message is sent: !tlhw 12
Both commands are answered with a status message.
Hot water temp.
Status of charge pump for solar accessories
Solar panel temperature
Solar tank temperature, coil
Solar tank temperature, peak
2), 3),
Status of addition
4)
Time factor on addition
Total run time hot water
Answer
Description
?status
Change operating mode
Auto/add. heat only
?status
Temporary lux, hot water. 0/3/6/12 hours.
?status
Temperature (offsetting the heat curve in systems without
room sensors)
?status
Temperature (offsetting heat curve in systems without room
sensor), climate systems 2
?status
Temperature (offsetting heat curve in systems without room
sensor), climate systems 3
?status
Temperature (offsetting heat curve in systems without room
sensor), climate systems 4
?status
Temperature (setting the room temperature in systems with
room sensors)
?status
Temperature (setting the room temperature in systems with
room sensors), climate system 2
?status
Temperature (setting the room temperature in systems with
room sensors), climate system 3
?status
Temperature (setting the room temperature in systems with
room sensors), climate system 4
?status
activating/deactivating holiday settings
Resets alarm
Changed fan speed. 0= normal fan speed
1)
1)
1)
2+1)
2), 3), 4), 5), 7)
6)
1)
1)
1)
1)
1)
1)
GB
2), 3+1), 4+1)
17

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis