KKT KOLBE IND8000RL Benutzerhandbuch Seite 34

Using your induction hob
3. Touch the heating zone selection control.
An indicator next to the key will flash.
4. Select a heat setting by touching the
or use the slider control.
• If you don't choose a heat setting within 1 minute, the
induction hob will automatically switch off. You will need
to start again at step 1.
• You can modify the heat setting at any time during coo-
king.
5. By touching the buttons
by touching the button
power level to „0".
If all cooking zones are disabled and there's no action,
the display will automatically turn off after 1 minute if
no suitable pan is placed on it.
If the display flashes
This means that:
• You have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The
display will automatically turn off after 1 minute if no suitable pan is placed on it.
34
or
and at the same time or
for a longer time, you can get the
alternately with the heat setting -
-buttons