Important Information; Mounting Instructions - Duravit OpenSpace B Montageanleitung

Important information

Mounting instructions information
These mounting instructions come as part of the Duravit
shower screen and should be read carefully prior to
installation.
Explanation of the key words and symbols
NOTICE! To avoid property damage
Link to the mounting information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Target readership and qualifications
The shower screen may only be installed by a qualified
plumber.
NOTICE!
Local installation regulations and any country-specific
standards must be observed at all times.

Mounting instructions

Please read pre-installation information sheets prior to
the installation. These are available to download on the
Internet at www.duravit.com.
Installing a shower screen with a tap on the right
1
(Diagram 1)
> The illustrated installation steps should be
reversed when installing a shower screen with a
tap on the right.
Measuring clearances and observing the tolerance
3
compensation (Diagram 3)
> Pay attention to the dimensional drawings when
measuring the clearances.
> Observe the neutral point on the wall for a
trouble-free installation.
> Use washers to adjust the height of the wall
profiles.
II
Observing the mounting area (Diagram II)
> Observe the mounting area of the tap unit in
accordance with the dimensional drawing, see
grey areas.
5
DA_M_OpenSpace B/15.08.2