Important Information; Mounting Instructions - Duravit P3 Comforts Montageanleitung

Important information

Mounting instructions information
These mounting instructions come as part of the Duravit
shower tray and should be read carefully prior to
installation.
Explanation of the key words and symbols
Is used to address practices not related
NotIcE
to physical injury.
Link to the mounting information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and leak-tightness
target readership and qualifications
The shower trays must only be installed by trained
plumbing engineers.
Risk of product and/or
NotIcE
property damage!
> Observe the local installation regulations and any
country-specific standards at all times.

Mounting instructions

Please read pre-installation information sheets prior to
the installation. These are available to download on the
Internet at www.duravit.com.
B2
Installing the shower tray flush with the floor
(Diagram B2)
> Observe the installation heights of the individual
products (a+b) and the height of the adhesive layer
(z) to install the shower tray flush with the floor.
B16
Using the wall profile (Diagram B16)
> Use the optimum wall profile # 790104 for sound
insulation and to accommodate expansions in the
screed depending on the position of the installation
and the site conditions.
c2
Installing the shower tray flush with the floor
(Diagram c2)
> Observe the installation heights of the individual
products (a+c) to install the shower tray flush with
the floor.
c4
Installing the shower tray flush with the floor
(Diagram c4)
> Observe the installation heights of the individual
products (a+d) to install the shower tray flush with
the floor.
c14
Using the wall profile (Diagram c14)
> Use the optimum wall profile # 790104 for sound
insulation and to accommodate expansions in the
screed depending on the position of the installation
and the site conditions.
5
DU_M_P3 Comforts/15.02.1