Other Settings; Display Information - auna 10026443 Gebrauchsanleitung

Prune invalid
To remove stations that are listed but unavailable, press the MENU button and select „Prune
invalid>[YES]" by the use of the SELECT control.
• Manual tune
1. To select manual tune, press the MENUbutton and select „Manual tune".
2. Rotate the SELECT control to move through the DAB channels, the display will show „5A to 13F" and their asso-
ciated frequencies.
3. When your desired frequency appears in the display, press an the SELECT control to confirm.
• DRC (Dynamic range compression)
lf you are listening to music with high dynamic rangein a noisy environment, you maywish to compress the audio
dynamic range. To change DRC, press the MENU button then enter into the „DRC" section, and select DRC high,
low, or off by the use of the SELECT control.
• Station order
You can choose the order of the DAB station list to be either alphanumeric, ensemble or valid.
To change station order, press the MENUbutton then enter into the „Station order" section, and select Alphanu-
meric, Ensemble or Valid by the use ofthe SELECT control.
FM Radio
FM radio mode receives analogue radio from the FM band and displays RDS
information about the station if available.
To enter FM mode, either press MODE until the display shows „FM
radio" or select „FM radio" in the main menu by the use of the SELECT
control.
Selecting stations
To search for a station, press on the SELECT control once, the radio will start to scan up the frequency band, and
it will stop automatically once a station has been found. Alternatively, you can also press and hold the
button to scan up or down the frequency band.
To tune manually, rotate the select control for your desired frequency.
Presets
To store a FM preset, press and hold the MEMORYbutton until the display shows
the „Save to Preset" screen. Select one of the 10 presets to store the current sta-
tion. To select a preset, press the
MEMORY button once, then select one of the listed preset stations. When a
preset station is playing, „Pn" (P1, P2 etc ... ) will appear in the lower part of the
display.
Displayinformation
While the radio is playing, the frequency will be displayed, and if RDS information is available, station name and
any further RDS information such as programme name, track title and contact details can be displayed. Stereo
broadcasts are indicated with an icon at the top of the screen. To view further information about the broadcast,
press the INFObutton.

Other Settings

• Scan settings
FM scan is defaulted to stop at any available station, this would result the poor reception from weak stations. Ta
change the scan settings to stop only at stations with good signal strength, press the MENU button then enter into
the „Scan setting" section and select YES by the use of the SELECT control.
Other Settings
or
22