Alarms And Sleep - auna 10026443 Gebrauchsanleitung

• Audio settings
The radio will automatically switch between FM stereo and mono reception, but you can override this and switch
this function manually which is helpful for poor signal reception.
To select list ening in mono, press the MENU butt an then enter into the „Audio setting" section and select YES by
the use of the SELECT control.
Note:
During FM stereo reception , the received LIR stereosoundwill be automatically combined to one single channel to suit
the single speaker design of this radio.
AUXin
AUXinmode plays audio from an external audio source such as MP3
player. To play audio with Auxin mode:
1. Decrease the volume level an both the radio and the audio source device.
2. Connect the external audio source to the AUXIN (3.5mm) stereo socket.
3. Either press MODE until the display shows „AUXin" or select „AUX in" in the
main menu by the use of the SELECT control.
4. Set the desired volume an the radio and the external audio device if necessary.
Note: To further enhance energy saving, unit will go into standby mode after ab out 15 minutes from Aux in mode
if with out signal input.
Alarms
There are two wake-up alarms with snooze function and one sleep function to turn the radio off after a set period
. Each alarm can be set to start in a particular mode. To set or change an alarm:
1. Select either Alarm 1 or 2 in the main menu or press the ALARMbutton an the remote control.
2 . Select theAlarm number (1 or 2) and set the following parameters:
Enable: Off, Daily, Once, Weekends, Week days
Time:
Mode: Buzzer, In ternet radio, DAB, FM
Preset: Last listened or 1-10
Volume: 0-32
3 . To activate the new settings, scroll down the menu using the SELECT control and select „Save". The display will
show the active alarms with an icon at the bottom left.
4. The alarm will be triggered at the preset time. To temporarily silence it, press the SNOOZE button. The Radio
will switch to standby for the set period , and the silenced alarm icon flashes in the display.
5. During alarm, you can change the snooze period by repeatedly pressing on the SNOOZE button.

ALARMS AND SLEEP

23