Settings - auna Connect 150 MKII Bedienungsanleitung

EN
50

SETTINGS

Setting an alarm
1. Press and hold the MENU button on main unit or remote control and
turn and press the Select dial to select 'Main Menu'..
2. Turn and press the NAVIGATE dial to select 'Alarms'
3. Turn and press the NAVIGATE dial to select 'Alarm 1' or 'Alarm 2'.
4. Turn the Select dial to scroll through each alarm setting. If you want to
change a setting, press the Select dial. You can set the following alarm
options:
Enable Turn and press the Select dial to choose when you
want the alarm to repeat. The available options are
'Off ','Daily', 'Once', 'Weekends' or 'Weekdays'.
Time Turn and press the Select dial to adjust the hour of
the alarm. Note: If you have set to use the 12 hour
time format, make sure that you select the 'AM' or
'PM' version of the hour before pressing the Select
dial. Repeat to set the minutes of the alarm.
Mode Turn and press the NAVIGATE dial to choose between
'Buzz', 'Internet radio', 'DAB', 'FM'.
Volume Turn and press the NAVIGATE dial to set the volume
when the alarm sounds.
Save Turn and press the NAVIGATE dial to save the alarm.
Sleep setting
This function allows you to program the unit to turn to standby mode by
itself after a set period of time.
1. Tap the SLEEP button on remote control, the sleep time icon"SLEEP"
appears on the display.
2. Repeatedly tap the SLEEP button to select a sleep time. The unit will
turn off after "Sleep off-15mins - 30mins - 45mins - 60mins" Wait for 3
seconds after your selection for the unit to confirm the selection, the unit
will play for the selected length of time then automatically turn off.
3. To cancel the sleep timer, tap the SLEEP button repeatedly until timer
shows "OFF", the sleep time icon "SLEEP" disappears on the display.