Headphone.jack - auna 10026443 Gebrauchsanleitung

Sleep
To activate the sleep function, either select it in the main menu by the use of the SELECT control or
repeatedly pressing on the SLEEP button. The display will show the sleep time and you can choose from: Sleep
Off, 15, 30, 45, 60, 75, 90 minutes.
Once the sleep time has been set, it will return to the main menu.
MUTE FUNCTION (remote control only)
Press the MUTEbutton on the remote to stop the sound from the speakers temporarily, the sound stops and the
display will show the mute icon and „Muted".
To cancel mute and restore the sound, press the MUTEbutton again or press the VOLUME +/-.

HEADPHONE.JACK

A3.5mm type stereo headphone jack is located at the back of the unit. Connect a set of stereo
headphones (not included) to this jack for private listening without disturbing others. The speakers are automati-
cally disconnected when the headphones are in use.
IMPORTANT:
When using headphones always set the volume to a low level before you put the headphones on. Then insert the head-
phones and gradually increase the volume to a comfortable listening level.
SPECIFICATIONS
Power Supply: AC/DC ADAPTOR INPUT: AC 1 00-240V-60/50Hz OUTPUT: DC 12V 1.5A
Output Power: 5W
USB port charging: 5V = 1A
Unit Dimension: 115 (L) x 128 (W) x 190 (H) mm
Temperature: 5oC to 35oC; Humidity: 5% to 90%
Radio Section
Tuningrange: DAB 174-240MHz
FM87.5-108MHz
Aerial: Rod antenna
General
Terminals-Output: 3.5mm stereo headphone
Aux ln: 3.5mm Jack
Specifications subject to change without notice
24