System Settings - auna 10026443 Gebrauchsanleitung

Most of the functions of this unit can be operated by pressing the buttons an t he fron t panel or the
corresp onding buttans on t he remote control handset.
Mains Connection
1. Connect the AC power cord to the unit via the AC socketat the
back.
2. Plug the AC powercord to the AC mains outlet.
Network Connection
Wired network
1. Check first of all whether the controllamps (LINK/ACT) of your LAN connection or your router light up.
2. Use an Ethernet cable with RJ45 connectorto connect the NETWORK socket ofthe radio with the LAN port of
your router.
3. Proceed for the operation as described in the below „GETTING STARTED". But no need to run through the setup
wizard
Note:
Informalionon the LAN connection can be obtained from the user manual of the router
manufacturer.
Wireless network
1. Check first of all whether the controllamps (LINK/ACT) of your WLAN connection or your router light
up.
2. Proceed for the operation as described in the below „GETTING STARTED". It is highly recommended to
run through the setup wizard in the system settings section.
Note:
Informalion on the WLAN/WiFi network connection can be obtained from the user manual of the router manufacturer.
Walls or other obstacles may influence the WiFi range. Try to find the best location to avoid interruption
and interference while operating.
GETTING STARTED
Press the button once to switch on the radio, the display will show the main menu. Togo to a function or open a
sub-menu, rotate the SELECT control followed by pressing on it to confirm. Each function is
selected via a menu consisting of several levels.
Main menu
The following modes can be selected in the main menu:
Internet radio, Music player, DAB radio, FM radio, AUX in, Sleep, Alarms, System settings.
To select your desired function, rotate the SELECT control followed by pressing on it to confirm.
Systemsettings
Set up wizard
The setup wizard is available in the system settings section, you can run through this to configure settings for date/
time and network, once this has finished, your radio is ready to use.
Note:
No need to run through the setup wizard if a wired network is used.
12/24 hour display
To select your preference between 12 or 24 hour clock displayformal-rotate the SELECT control followed
by pressing on it to confirm.
Time/Date
The time and date can be manually sei or automatically via the network, DAB or FM.
SET UP & CONNECTION
16