Inhaltsverzeichnis
Werbung
_)
TO iNSTALL MOWER
1. Set parking
brake
lever
(P) and lower
attachment
lift lever
(N).
• Depress clutch/brake
pedal all the way down and hold.
• Pull parking brake lever (P) up and hold, release pressure
from clutch/brake
pedal, then release parking brake lever.
Pedal should remain in brake position.
Make sure parking
brake will hold tractor secure.
R
Parkinc Brake Lever
CAUTION:
Lift lever
is
loaded, Have
(N)
spring
a
tight
grip on lift lever, lower it slowly
and engage in lowest
position,
Lift lever is located on left side of fender,
A.
MOWER SIDE SUSPENSION
ARMS
B.
RETAINER SPRING
C. REAR LIFT LINK(S)
D. RIGHT SIDE REAR MOWER
BRACKET
E.
FRONT LIFT LINK ASSEMBLY
E
FRONT SUSPENSION
BRACKET
H. FRONT MOWER BRACKET
I.
LEFT SIDE REAR MOWER
BRACKET
K. BELT TENSION
ROD
L.
LOCKING BRACKET
M. ENGINE CLUTCH PULLEY
Q. DEFLECTOR
SHIELD
S. ANTI-SWAY
BAR
W. FRONT GAUGE WHEEL
Front
Engine
Transaxle
Q. Deflector Shield
4. Slide mower under tractor.
• Bring belt forward and check belt for proper routing in all
mower pulley grooves.
NOTE: Be sure mower side suspension
arms (A) are pointing
forward before sliding mower under tractor.
• Slide mower under tractor until it is centered under tractor.
N. Lift Lever
2. Assemble front gauge wheel (W) to front of mower.
H. Front Mower
Bracket
W. Front Gauge
Wheel
X. Shoulder Bolt
Y.
11/40.D.
Washer
Z. 3/8-16 Locknut
3. Turn steering
wheel
left and position
mower.
• Turn steering wheel to the left as far as it will go and position
mower on right side of tractor with deflector shield (Q) tothe right.
A. Mower Side
Suspension Arms
Q. Deflector Shield
5. Install anti=sway
bar (S) (If equipped)
l
Anti-Sway
Bar (S)
_Towards
Transaxle.
Towards
Mower Deck_
90° End.
integrated Washer End
• From right side of mower, first insert 90 ° end of anti-sway bar
(S) into hole in transaxle bracket (T), located near left rear
tire in front of transaxle.
NOTE: Flashlight may be helpful.
20
Werbung
Inhaltsverzeichnis
