Version With Relay Output; Operating Safety - Bürkert 8311 Bedienungsanleitung

4.3.3 Version with relay output

Not connected
Not connected
0 VDC
1
4
Common
3
5
1 2
3
Normally Closed
2
V+
Not connected
(12-30 VDC)
Normally Open
Wiring of the en175301-803 fixed Wiring of the m12 fixed connector (12-30 Vdc power supply)
connector, relay output
The controller is fitted with a steerable M12 fixed connector:
Unfasten counternut Turn the fixed connector to the right position, but by max 360° to avoid
twisting of the cables inside the housing Fasten counternut using the appropriate tool while
maintening the fixed connector in the right position

Operating safety

When the voltage at the relay terminals is higher than 24 V and the
cable plugs are not correctly plugged-in and tightened, there is a risk to
electrocute yourself
Always check all the cable plugs before powering the device to ensure
the good operating of the device
8311 1