Installation And Getting Started - auna KR-500 Bedienungsanleitung

EN
26

INSTALLATION AND GETTING STARTED

Unpacking
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the main voltage
and before all other connections have been made.
• Do not cover any vents and make sure that there is a space of several
centimetres around the unit for ventilation.
Installation
1. Use the mounting template supplied with the unit to make anchor hole
marks on the kitchen cabinet.
2. Drill 1/4" holes on the marks.
3. Fasten the mounting plate with the spacers and the screws under the
hanger.
4. Drive the provided screw from the kitchen cabinet to the main unit(refer
to the picture).
are