Connections - GOK EN61-DS PS 16 bar Montage- Und Bedienungsanleitung

CONNECTIONS

Inlet,
optional
Outlet,
optional
All G. and H. connections according to EN 16129. Other connections may also be used.
6 / 11
Low-pressure regulator type EN61-DS PS 16 bar
Trading name and dimensions
acc. to standard
Combinded fitting (Komb.A)
• with polyamide gasket
• G.5 = Thread W 21.8 x 1/14
FR Shell (Shell-F)
• Wing nut, soft with rubber gasket and 5-wing
cap nut
• G.2 = Thread 21.8 x 1/14-LH - 60° ÜM
Small cylinder KLF
• with 5-wing cap nut
• G.12 = Thread W 21.8 x 1/14 ÜM
Compression fitting RVS
• G.15 = RVS 8
Compression fitting RVS
• G.22 = RVS 12
Italian connection
• with rubber gasket and cap nut
• G.1 = Thread W 20 x 1/14 ÜM
Trading name and dimensions
acc. to standard
Ball-cone connector
• H.4 = Thread G 1/4-LH-KN
Compression fitting RVS
• H.9 = RVS 10
Screw-in fitting
• H.22 = IG G 1/4
• For accepting a screw-in fitting with O-ring
Installation notes
Spanner size 30
Hexagonal
Tighten hand-tight.
Tighten hand-tight.
Spanner size 25
Hexagonal
Installation notes
Torques: G 1/4 =
10Nm